Model Tech P-47 Thunderbolt Especificações Página 30
- Página / 68
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
30
Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at service@globalhobby.net
❑ Cycle the retracts up and down a couple of times to check the alignment. The wheel should be centered within the
wheel cup and no part of the strut should touch the wing.
❑ When satisfied with the alignment, glue the wheel cup into place using Pacer Formula 560 Canopy Glue.
❑ Repeat the previous procedures to install the second wheel cup in the other half of the wing.
There are four precovered retract cover-plates (W70) included with your P-47. These plates are designed to be cut to
shape and glued to the exposed area of each retract mounting rail. They are provided for cosmetic purposes only.
❑ Kwik Bond Thick C/A
❑ Kwik Bond 5 Minute Epoxy - optional
❑ # 2 Phillips Head Screwdriver
❑ 2mm Hex Wrench
❑ Adjustable Wrench
❑ Electric Drill
❑ 1/8" & 11/64" Drill Bits
❑ Ernst Airplane Stand
YOU'LL NEED THE FOLLOWING PARTS:
❑ (2) Nylon Engine Mount Beams
❑ (1) Plywood Spacer (D23) - optional
❑ (4) 4mm x 25mm Socket-Cap Screws
❑ (4) 4mm x 30mm Socket-Cap Screws
SECTION 16: ENGINE INSTALLATION
YOU'LL NEED THE FOLLOWING SUPPLIES:
❑ Ruler
❑ Pencil
❑ Builder's Triangle
❑ Paper Towels - optional
❑ Rubbing Alcohol - optional
❑ NHP Epoxy Mixing Sticks - optional
❑ NHP Epoxy Mixing Cups - optional
❑ (4) 4mm Blind Nuts
❑ (4) 4mm Nylon-Insert Nuts
❑ (12) 4mm Flat Washers
Step 1: Aligning the Engine Mount Beams
☞
The references in the next few procedures are taken from the consideration that you are looking at the front of the
airplane with the airplane right-side up.
❑ Using a ruler and a pencil, draw a vertical centerline on
the firewall.
❑ Using a ruler and a pencil, measure down 3-3/8" from
the top of the fuselage and draw a horizontal line on the
firewall perpendicular to the vertical line.
☞
The 3-3/8" measurement must be taken from the vertical
centerline. To draw an accurate perpendicular horizontal line
it helps to use a builder's triangle.
- Specifications: 1
- TABLE OF CONTENTS 2
- SAFETY WARNING 2
- INTRODUCTION 3
- What Engine Should I Use? 4
- What Servos Should I Use? 4
- Do I Need Anything Else? 4
- SECTION 4: KIT CONTENTS 6
- SECTION 5: REPLACEMENT PARTS 8
- SECTION 8: WING ASSEMBLY 9
- SECTION 9: WING MOUNTING 12
- SECTION 26: FINAL ASSEMBLY 57
- PRODUCT EVALUATION SHEET 67
- Global Hobby Distributors 68
- Attn: Customer Service 68
- 18480 Bandilier Circle 68
Manuais e produtos relacionados com Brinquedos controlados à distância Model Tech P-47 Thunderbolt
(36 páginas)Miele T8722 manuals
Owner’s manuals and user’s guides for Tumble dryers Miele T8722.
We providing 1 pdf manuals Miele T8722 for download free by document types: Operations Instructions
Comentários a estes Manuais